Oil Pump Parts
The function of the oil pump is to pressurize the oil in the lower crankcase to the friction surfaces that need lubrication. Provide good lubrication for the engine. The gear chamber oil pump consists of a casing, an end cover, an oil pump drive shaft and a driving gear, a driven gear and a driven gear shaft, a driving gear and a pressure limiting valve. The driving gear is fixed to the drive shaft and driven by the drive gear. The driven gear shaft is fixed in the housing. The driven gear is loosely sleeved on the driven shaft, meshes with the driving gear and is driven by the driving gear.
| Product name: | Oil pump | Minimum order quantity: | one unit |
| Shipping place: | Jinan City, Shandong Province | Delivery time: | three days |
| Package: | standard | Warranty period: | half a year |
AZ1500070021A Heavy-duty Oil Pump Functions and Installation Method
Functions:
The heavy-duty oil pump AZ1500070021A is an essential part of a heavy-duty commercial truck's engine. It is responsible for pumping engine oil throughout the engine in order to lubricate the various components and reduce friction and wear. A properly functioning oil pump is critical to the longevity and performance of the engine.
Installation Method:
1. Before beginning the installation of the oil pump, make sure that the engine is turned off and the battery is disconnected.
2. Locate the existing oil pump on the engine and remove it using a wrench or socket set.
3. Clean the area around the oil pump mounting surface using a degreaser and a rag.
4. Apply a thin coat of engine oil to the mounting gasket on the new AZ1500070021A oil pump.
5. Install the new oil pump onto the engine, carefully aligning the mounting holes with the corresponding studs or bolts on the engine.
6. Tighten the mounting bolts or nuts to the manufacturer's recommended torque settings using a torque wrench.
7. Reconnect any hoses or lines that were disconnected during the removal of the old oil pump.
8. Refill the engine with the recommended amount and type of oil.
9. Start the engine and check for any leaks or abnormal noises. If everything appears to be normal, close the hood and test drive the vehicle to ensure proper function of the new oil pump.
Note: Always refer to the vehicle's owner's manual or consult a qualified mechanic if you are uncertain about any aspect of the installation process.
Oil pump mode：
| 61500070030 | A30-1011020A | 61800071010 | K11-1011100-01 | VG1246070040 | VG1246070022 |
| 161500070067 | 13026760 | 1011010A201-0000 | 1011010-36D | 611600070100 | 610800070312 |
| 610800070242 | 4941464 | 1011010-26E | 610800070020 | 612600070324 | 612600070317 |
| 612600070299 | 612600070270 | 612600070265 | 612600070060 | 612600070033 | 612700010065 |
| 612700010007 | 612630010256 | 612630010028 | 612600070484 | 612600070465 | 612600070329 |
| 080V05100-6281 | 4003950X | 1003691568 | 400395000 | 1003462963 | 1003393391 |
| 1001862862 | 1001695706 | 1000265663 | 080V05100-6297 | 3696436 | 2408001510000-BW |
| HG1500079010A | G02-119-00A+B | VG1500070048 | VG1246070043 | CY4120.07.100 | C15AB-M4W2448+A |
| D15-000-41+A | S00005249+06 | D15-000-31+A | P161500070064 |
Hot Tags: oil pump parts, Chinaoil pump parts manufacturers, suppliers, factory, WP12 Engine Oil Cooler, 71 Degree Thermostat, , Oil Cooler Module
