Toothed Belt AV13×1185
The structure of the V-belt is relatively simple, and its manufacturing process and installation accuracy requirements are not high.
Toothed Belt Product number: AV13×1185
Product introduction:
1. The structure of the V-belt is relatively simple, and its manufacturing process and installation accuracy requirements are not high.
2. The V-belt is relatively simple to use and convenient to maintain, and can be used in occasions where the center distance between two axes is relatively large.
3. The V-belt can transmit smoothly, and the noise generated during operation is very low. The belt body has good elasticity and can play the role of buffering and absorbing vibration.
4. When the V-belt is overloaded, it will slip on the pulley during transmission. This slipping phenomenon just plays a role in safety protection and can prevent damage to weak parts in the transmission device.
5.The appearance of the V-belt is a triangle, like the "V" in the letter, so it is also called a V-belt. It has two structures: a cord core and a rope core. Partial composition. It is a product with a relatively large output, a large variety and a wide range of uses in the transmission belt.
There are 2270LI, 2270LP, 2270LA on the triangle belt.
The meaning of each model of the triangle belt:
The specifications are different, and their sizes are also different.
For example, type A: width is 13MM, thickness is 8MM, while type B: width is 17MM, thickness is 10.5MM, type C: width is 22MM, thickness is 13.5MM.
Hot Tags: toothed belt av13×1185, Chinatoothed belt av13×1185 manufacturers, suppliers, factory, Toothed Belt AV10 1175
