Truck Water Pump
In the cylinder block of a car engine, there is a water channel for cooling water circulation, which is connected to the radiator (commonly known as the water tank) placed at the front of the car through a water pipe to form a large water circulation system. At the upper water outlet of the engine, a There is a water pump, driven by the fan belt, to pump hot water out of the water channel in the engine block and pump cold water in. There is a thermostat next to the water pump. When the car is just started (cold), it is not opened so that the cooling water does not pass through the water tank and only circulates in the engine (commonly known as small circulation) until the engine temperature reaches above 80 degrees. When the car is turned on, the hot water in the engine is pumped into the water tank. When the car moves forward, the cold wind blows through the water tank and takes away the heat.
| Product name: | Heavy truck water pump | Warranty period: | half a year |
| Product grade: | deputy factory, installed parts. | Minimum order quantity: | one unit |
| What models are available: | full range of heavy trucks | Mail: | 13075323252@aliyun.com |
To disassemble and install the 612600061364 water pump on a heavy-duty truck, follow the steps below:
1. First, drain the coolant from the engine and remove any hoses connected to the water pump.
2. Locate the water pump on the engine block and remove any bolts or screws holding the pump in place.
3. Gently tap the water pump with a rubber mallet to loosen it from the engine block. It may be necessary to apply more force if the pump is stuck.
4. Once the water pump is loose, carefully remove it from the engine block and place it on a clean work surface.
5. Inspect the pump for any signs of wear or damage. If necessary, replace any damaged components.
6. Thoroughly clean the engine block surface where the water pump will be installed.
7. Apply a thin layer of gasket sealant to the new water pump gasket and carefully position the gasket onto the pump.
8. Install the new water pump onto the engine block and insert the bolts or screws that was removed earlier. Tighten the bolts to the manufacturer's specifications.
9. Reconnect any hoses that were disconnected from the old water pump and refill the engine with coolant.
10. Finally, start the engine and check for any leaks or abnormal noises coming from the water pump.
Water pump model:
| AZ1500060050 | FAT5042481720 | 61800061007 | VG1246060035 | 1D1L00 | 1003374138 | |
| 612640060102 | FAT5801569151 | K12L1-1307100 | VG1500069055 | 4972857X | 1005598778 | |
| 612630061257 | FAT5801590769 | K6000-1307020A | VG1500069951 | 4972853X | 4934058 | |
| 612630060663 | HG1500069229 | L3001-1307100D | AZ1500060033 | 3966841 | 13023061 | |
| 612630060547 | D5600222003 | VG1062060351 | 612600062018 | 12273212 | ES6102V16 | |
| 612600061945 | 612600061685 | 612600061603 | 612600061574 | 13068165 | D20-000-30 | |
| 612600061359 | 612600061364 | 612600061498 | 612600063871 | 13072498 | D20-000-03B | |
| 610800060233 | 6120300060663 |
612600060307 |
612600060465 | 612600061296 | D20-000-32 | |
| 161500060033 | 610800060207 | 610800060144 | 612600060444 | 612600060569 | 380073700 | |
| 161500060050 | 161500060229 | 200V06500-6694 | 202V06500-6696 | 202V06500-6696 | 2105060132 | |
| 1307010/81D | 1307010A29D | 1307010AM50-0000 | 1307010BM18-099VH | 1307010D81DX | 13073375 | |
| 1307010-36D | 1307010-18VY/C | 1307010-18VY/C | 1307010-640-0000 | 13065494 | 13034987 | |
| 1006354486 | 1007096581 | 12159770 | 1300-M10-01085701 | 12273240 | 3803403 | |
| 1003385162 | 1003431855 | 1003571141 | 1003793032 | 1003793034 | 1004450212 | |
| 1001762507 | 1002123784 | 1003179505 | 1003374135 | 1003374135 | 611600060006 | |
| 1001554459 | 1001738101 | 1002023407 | 1001996661 | 1001996662 | 1001996660 | 1001996660 |
| 1001222936 | 1001226931 | 1001226987 | 1001247444 | 1001273037 | 1001542896 | 1001549678 |
| 1000649632 | 1000665495 | 1000693783 | 1000712807 | 1000712812 | 1000873618 | 1000966796 |
| 082V06500-6683 | 1000173871 | 1000271133 | 1000402861 | 1000437469 | 1000451738 | 1000623065 |
| 080V06500-6700 | 1000162541 | 1000105741 | 1000103510 | 1000054021 | 1000054020 | 1000054019 |
Hot Tags: truck water pump, Chinatruck water pump manufacturers, suppliers, factory, Oil Cooler Module, 71 Degree Thermostat, , , WP12 Engine Oil Cooler
