Drive Belt 9pk

Product introduction:

What to do if the belt is broken: In most cases, the rubber part is worn out because the slack has not been adjusted for a long time, and the cracked belt causes the belt to detach from the belt pulley. Therefore, it is not difficult to find if it can be checked early. But many people often ignore the inspection at this time, thinking that the belt is accidentally falling off during the rotation, and then continue to move forward after installing it. As a result, the cracks in the belt become deeper and deeper, and finally it is completely broken, making it impossible to move on.When going out for a long trip, if you find that the belt has been worn out, you can use women's nylon stockings to fasten the broken part, so that the belt will not easily detach from the belt groove on the belt pulley, and it will not break temporarily. Keep a certain distance to ensure that you home. If it is discovered late and the belt is broken during the journey, charging will be stopped immediately and the charging warning light will be on. At this time, you should stop immediately, otherwise the engine will overheat soon and you will still be unable to continue driving.Use nylon stockings to scratch the three belt pulleys of the crankshaft, water pump and generator, tighten them as tight as possible, and cut off the remaining overgrown parts. Taking this method, as long as the driving speed is not very fast, you can guarantee that you will drive the car back safely. If you are not driving at night and you are not very far from the destination, you only need to connect the crankshaft and the belt pulley of the water pump to reduce the load. At the same time, the two wheels are easier to tighten. Step on the accelerator while driving to be more relaxed. Otherwise, if you add too much oil, the nylon stockings will be slippery and cannot move the belt pulley.

Hot Tags: drive belt 9pk, Chinadrive belt 9pk manufacturers, suppliers, factory, Sinotruk Fan Belt 6PK1020, , ,